Relocation of sign previously approved for 633 toulouse. To install one (1) double-faced wood sign to read jazzy nola" per application submitted on 12/9/14 sign will measure: 24w x 24h (overall) x 1 thickness sign will hang from chains mounted to underside of balcony outriggers, perpendicular to the street, centered above the door. No additional illumination or lighting is approved

Remove all nonconforming lighting (dual-headed floodlight fixtures) replace main building fascia with 7/8" beaded fascia per vcc standard detail #12 (attached), and soffit of main building with 1 x 6 s2s t&g boards, running perpendicular to the street repoint masonry as needed to match existing with vcc mortar formula (below) replace bricks as necessary using matching bricks (soft reds) remove metal cap flashing from both side parapet walls, properly step flash and install mortar cap as needed using vcc approved stucco formula (below) remove wood and metal awning from rear of main building remove brick and concrete paving denoted in attached drawing stamped vcc approved 08/14/14 install brick paving in both side alleys and rear courtyard as needed in herringbone pattern prime & paint replacement fascia & soffit as needed to match existing (white)mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not pe

To install one (1) double-faced sign to read "smart pulse" per drawings submitted on 05/12/15 & stamped approved 05/20/15sign will measure: round sign 15" diameter; rectangular panel 8" x 15"; thickness 1. 5"sign will hang perpendicular to the street, centered above the doorsign will hang from chainssign will have a blue background with white letteringno additional illumination or lighting is approvednote: all existing signs must be removed. The bottom of the sign shall be at least above the surface of the sidewalk beneath it. Signs shall not extend beyond 40" from the building face.

Remove all nonconforming lighting (dual-headed floodlight fixtures) replace main building fascia with 7 8" beaded fascia per vcc standard detail #12 (attached), and soffit of main building with 1 x 6 s2s t&g boards, running perpendicular to the street repoint masonry as needed to match existing with vcc mortar formula (below) replace bricks as necessary using matching bricks (soft reds) remove metal cap flashing from both side parapet walls, properly step flash and install mortar cap as needed using vcc approved stucco formula (below) remove wood and metal awning from rear of main building remove brick and concrete paving denoted in attached drawing stamped vcc approved 08 14 14 install brick paving in both side alleys and rear courtyard as needed in herringbone pattern prime & paint replacement fascia & soffit as needed to match existing (white)mortar: no more than 1 part portland cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not pe

Relocation of sign previously approved for 633 toulouse. To install one (1) double-faced wood sign to read jazzy nola" per application submitted on 12 9 14 sign will measure: 24w x 24h (overall) x 1 thickness sign will hang from chains mounted to underside of balcony outriggers, perpendicular to the street, centered above the door. No additional illumination or lighting is approved

To install one (1) double-faced sign to read "smart pulse" per drawings submitted on 05 12 15 & stamped approved 05 20 15sign will measure: round sign 15" diameter; rectangular panel 8" x 15"; thickness 1. 5"sign will hang perpendicular to the street, centered above the doorsign will hang from chainssign will have a blue background with white letteringno additional illumination or lighting is approvednote: all existing signs must be removed. The bottom of the sign shall be at least above the surface of the sidewalk beneath it. Signs shall not extend beyond 40" from the building face.